Bosch · Washer · 19 code records
Search this source-linked list using the exact display. Open a matching record for its plain-language meaning and manufacturer reference, then confirm the interpretation in your model manual.
Washer codes often describe what the control detected during filling, draining, door locking, or spin. The letters are not universal: start with the washer brand and full code, then check whether the guide covers your product family. The article scope may not cover every Bosch washer model or revision.
E:00 / -18Bosch identifies a blocked or obstructed pump condition for this washer display.
The punctuation and alternating display are part of the code. Use the matching model manual before any owner-accessible maintenance.
E:00 / -23Bosch says water is present in the base or the washer is leaking.
Stop the washer, keep clear of wet electrical areas, and contact Bosch support.
E:30 / -10Bosch lists multiple possible causes, including low water pressure, inlet filters, a closed tap, a kinked hose, or a water-level measurement issue.
This is an intentionally broad manufacturer-listed family; identify the exact model and source details before acting.
E:30 / -20Bosch lists oversudsing or additional water as possible contexts for this washer display.
The exact model determines the interpretation. Do not add water or detergent based on a generic code lookup.
E:30 / -80Bosch lists drain-hose, standpipe, drain-pump, or oversudsing conditions for this display family.
Installation and pump procedures vary. Use the exact washer manual before touching hoses or residual water.
E:36 / -10Bosch lists a drain-pipe or water-outlet-hose condition for this washer code.
Use the model manual; hose and pump access can involve residual water and vary across installations.
E16Door is not detected as locked properly in Bosch's washer code list.
Do not force a locked door or bypass the interlock. Use the exact appliance manual.
E17Bosch groups these with blocked water-inlet filters, a supply hose issue, or low water pressure.
Water connections can leak if disturbed. Use the exact model manual and stop if access is hidden or unsafe.
E18Drain hose or drain-path blockage/kink error family in Bosch's washer code list.
Residual water may be hot. Do not use service-flap or pump steps unless the exact owner manual describes them.
E32Load imbalance detected; Bosch says spin may be reduced or stopped while the washer attempts to redistribute laundry.
This is a load condition, not a parts diagnosis. Follow the load guidance in the owner's manual.
E33Bosch says detergent foam was detected; excess or old detergent can cause the condition.
Follow the detergent amount and type specified for the exact washer model.
E34Door is not detected as locked properly in Bosch's washer code list.
Do not force a locked door or bypass the interlock. Use the exact appliance manual.
F16Door is not detected as locked properly in Bosch's washer code list.
Do not force a locked door or bypass the interlock. Use the exact appliance manual.
F17Bosch groups these with blocked water-inlet filters, a supply hose issue, or low water pressure.
Water connections can leak if disturbed. Use the exact model manual and stop if access is hidden or unsafe.
F18Drain hose or drain-path blockage/kink error family in Bosch's washer code list.
Residual water may be hot. Do not use service-flap or pump steps unless the exact owner manual describes them.
F29Bosch groups these with blocked water-inlet filters, a supply hose issue, or low water pressure.
Water connections can leak if disturbed. Use the exact model manual and stop if access is hidden or unsafe.
F32Load imbalance detected; Bosch says spin may be reduced or stopped while the washer attempts to redistribute laundry.
This is a load condition, not a parts diagnosis. Follow the load guidance in the owner's manual.
F33Bosch says detergent foam was detected; excess or old detergent can cause the condition.
Follow the detergent amount and type specified for the exact washer model.
F34Door is not detected as locked properly in Bosch's washer code list.
Do not force a locked door or bypass the interlock. Use the exact appliance manual.
No matching code in this manufacturer article set. Check the exact display on the official support site.
Before you act
Washers: Do not move a heavy washer, force a locked door, or open electrical areas to investigate a code. Stop if water reaches an outlet or the machine moves or shakes violently.
These summaries describe the manufacturer's published explanation. They are not a remote diagnosis and do not establish that a specific component has failed.